Etiket arşivi: ibiza mk5 vagcom kodları

Seat Ibiza MK5 6J 2008-2017 VagCom Kodları

SERVİS UYARISI

Servis Uyarısı Sıfırlama
1 – Module 17 – Code Box instruments- (25327)
2 – Adaptations
3 – PIM: Restart prolog.interv.mant seçin
4 – Birini seçin:
– No warning (default)
– Active Notice
– Reset
Diğer Yol:
1 – Applications
2 – Inspection service reset
3 – Select the desired

KM ye göre uyarıyı sıfırlama
1 – Module 17 – Code Box instruments- (25327)
2 – Adaptation
3 – Select
4 – Fixed: Next máx.hasta mileage rev.en kil function.
5 – Change the desired value. Default 30000
6 – FIXED: resposic value. Próx.inspecc. Depending on the mileage
7 – Change to the desired value. Default 30000
8 – PIM maximum value of KM-delivery kilometric / review
9 – Change the desired value. Default 30000
10 – PIM: minimum value of km-long sandy provision / review
11 – Change the desired value. Default 15000
12 – SIA: value máx.de journey to service
13 – Change the desired value. Default 15000

Gün sıfırlama
1 – Module 17 – Code Box instruments- (25327)
2 – Adaptation
3 – Select
4 – Fixed: Time má.hsta next rev. Depending on the time
5 – Change the desired value. 730 default d
6 – FIXED: reposic.próx inspecc.en value function of time
7 – Change to the desired value. Default 365 d
8 – PIM maximum value of elapsed time between overhauls
9 – Change the desired value. 730 default d
10 – PIM: minimum value of elapsed time between overhauls
11 – Change the desired value. Default 365 d
12 – SIA: value longer up service
13 – Change the desired value. Default 365 d

———————————————————————————————————————

ALARM

Alarm Aktivasyonu
Donanım ekleme gerekmez. Standart alarmı olmayan tüm araçlara uyumludur.
1 – Module 09 – Electronic control unit. Code (31347)
2 – Extended coding (bytes)
3 – Byte 12
4 – Activate Bit 0 (Anti-theft system installed / active)
5 – Adaptation
6 – Submenu – Anti-theft protection
7 – DWA Alarmverzoegerung (Change value to “door contact thatcham driver”)
8 – DWA Camper Modus (Change value to “enabled”)
9 – Ueberwachung Innenentriegelungshelbel (Change value to “activated”)
10 – Akustischer Alarm Signalhorn (Change value to “enabled”)
11 – Submenu – Answer Signals
12 – Akustische Rueckmeldung global (Change value to “enabled”)
13 – Akustische Rueckmeldung Signalhorn (Change value to “activated”)

Kontak Açıkken Kapı Açık Uyarı Sesi İptali
1 – Module 17 – Code Box instruments- (25327)
2 – Adaptation
3 – Select – On active message, exciter
4 – Select one of three options:
– Driver’s door (default)
– All doors
– No indication

Araç kapı açıp kilitlerken uyarı sesi
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Signs response
4 – Sub – Akustische rueckmeldung entriegeln — On
5 – Sub – Akustische rueckmeldung verriegeln — On
6 – Sub – Global rueckmeldung — On Akustische
7 – Sub – Akustische rueckmeldung Signalhorn — On
8 – Sub – Menuesteuerung Akustische rueckmeldung — On (On Screen Display)
9 – Sub – Dauer der vom akustischen rueckmeldung einfachhorn — Normal (No alarm) or Kurz (with alarm)

Emniyet kemeri sesi değiştirme
1 – Module 17 – Code Box instruments- (25327)
2 – Extended Coding (Text mode)
3 – Select – Notice for the use of seat belts
4 – Select one of the options:
– Option 1 (default)
– Variant 2
– Off

———————————————————————————————————————

MULTIMEDYA

Input gain control RADIO FM, AM, DAB, SAT
With this mod you can change the antenna gain.
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Adaptation
3 – Select – Amplify audio input Management Generation 2
4 – Change desired values ​​- By default -128db

Hide / Show band RADIO AM
Lately almost all Lions come without the AM band active. With this mod you’ll enjoy it.
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Extended Coding (Text mode)
3 – Byte 14 AM Disable
4 – Select between two options:
– Enabled (default) The hidden
– Not activated (Sample)

Mikrofon Hassasiyet Ayarı
Mikrofon sesinizi yeteri kadar alamıyorsa bu ayarla düzeltebilirsiniz.
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Adaptation
3 – Select – Microphone Sensitivity
4 – Change the desired value. Default 0 db

CD / DVD Çıkarma İptali Aktivasyonu
CD / DVD çıkarma tuşunu iptal edebilirsiniz
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Adaptation
3 – Select – Key CD ripping
4 – Select one of the two options:
– Unlocked (default)
– Locked

AUX IN (USB + AUDIO MODULE) Aktivasyonu
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Extended Code (Text mode)
3 – Byte 8 AUX-IN
4 – Select one of the two options:
– On (default)
– Off

USB input modu değiştirme
USB, IPOD veya Full load modunu iptal edebilirsiniz.
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Extended Code (Text mode)
3 – Byte 19 USB
4 – Select one of four options:
– USB-IPOD (default)
– Off
– Charge
– Full

Kaynak Ekleme
Ekstra USB girişi ekleme.
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Adaptation
3 – Select – Interface for external media activation
4 – Select one of four options:
– Connection 1
– Connection 2
– Connection 3
– Connection 4

———————————————————————————————————————

ISITMA SOĞUTMA SİSTEMİ

Klimanın daha fazla soğutması
30% daha fazla soğuk.
1 – Module 08 – Electronic air conditioning / heating
2 – Extended Coding (Text)
3 – Temperature Adjustment
4 – Change value: Set colder func.refrig

Show climate control fan speed with LEDs in AUTO mode
As you know, in manual mode the speed segments are led us indicating the fan speed, however they are not automatic. With this mod the it’ll also show in automatic mode.
1 – Modulo 08 – Air conditioning / heating electronics
2 – Extended coding (bytes)
3 – Byte 8
4 – Activate Bit 0

Heating time of the windscreen
With this mod, you can change the time that warming in the front window is active.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Heating crystals
4 – Sub – Running time of heated front window
5 – Change value to 240s

Heating time of the rear window
With this mod, you can change the time that warming in the rear window is active.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Heating crystals
4 – Sub – Heckscheibenheizung zeitwert
5 – Change value to 600 s

Automatic activation for wind defrost
With this mod, to start the car if the conditions are right cold start the air conditioner blowing the windscreen defrosting default.
1 – Module 08 – Electronic air conditioning / heating
2 – Adaptations
3 – Select – Activa. Autom. Calefacc. Windshield deicing MAX
4 – Change value to On

Modify grades warning of possible danger ice
With this mod, you can change temperatures warning of possible danger of ice.
1 – Module 17 – Code Box instruments- (25327)
2 – Adaptation
3 – Select – Outside temperature
4 – Search option – P exit temperature ice warning
5 – Modify the desired value: 6 ° C Default
6 – Search option – P ice warning entry temperature:
7 – Modify the desired value: 4 ° C Default

Heating Mirrors and Windows in Case Of Freeze
Select Control unit 09 (Central Electrics)
Control unit Long Coding
Byte 14
Bit 3-Bit 4 Activate

———————————————————————————————————————

CAMLAR / AYNALAR

Disabling comfort windows opening from the door lock
With this mod we can deactivate that they go down and that they raise the windows with the key in the door lock.
It is very interesting because it has been proven that in some cases with any key of the group can be lowered and open windows by turning it in the lock.
In no case with a key other than the car opens, but we have also detected that if it can be closed.
1 – Module 09 – Electronic control unit. Code (31347)
2 – Adaptation
3 – Access control 2 – Options (Various values)
4 —— Schliesszylinder komfort oeffnen – Options (Activated – Inactive)
5 —— Schliesszylinder komfort schliessen – Options (Activated – Inactive)

Semi-automatic folding and unfolding mirrors
With this mod, holding down the button on the remote can fold or unfold the mirrors to lock or unlock the car.
1 – Electronic control module 09-. Code (31347)
2 – Adaptation
3 – Select – Control Access 2
4 – Sub – Funk modus spiegelanklppung
5 – Change value via remote control Convenience key opeation
Hold the button to fold or unfold

Automatically lock mirrors on locking. (Both via AB and key in door) tested: 2016 model
With this adjustment, the mirrors automatically lock in when the car is locked. If you lock through AB, you do not have to hold down the lock button.
Use this function icm the following function so that you save the mirrors during freezing.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Control Access 2
4 – Sub – Funk modus spiegelaklappung
5 – Verander waarde By command via remote control look key

OPTION IN BOARD COMPUTER: Automatic locking of mirrors on locked on / off tested: 2016 model
With this adjustment, you choose whether to turn the mirrors on or off automatically via the on-board computer
1 – Module 09 – Electronic control unit. Code (31347)
2 – Adaptation
3 – Select – Access control 2
4 – Submenu – Menuesteuerung funk spiegel anklappen – Options (Inactive – Activated)
5 – Verander waarde naar On
De menuoptie is nu zichtbaar in het CAR-setup menu.

Opening and closing the windows comfort
With this modification will get the opening and closing windows in comfort mode.
1 – Electronic control module 09-. Code (31347)
2 – Adaptation
3 – Select – Control Access 2
4 – Sub – Comfort opening
5 – Change value to Active
6 – Sub – Menuesteuerung konfortbedienung einstellbar
7 – Change value Adjustable
8 – Sub – Funk konfort oeffnen
9 – Change value to Active
10 – Sub – SAD konfort oeffnen
11 – Change value to Active
12 – Sub – Comfort closing
13 – Change value to Active
14 – Sub – Funk konfort schliessen
15 – Change value to Active
16 – Sub – SAD konfort schliessen
17 – Change value to Active

Activate windows with running even opening the doors so they do not stop
With this mod, the windows work even with the doors open.
1 – Electronic control module 09-. Code (31347)
2 – Adaptation
3 – Select – Functions assist light
4 – Select – Control Access 2
5 – Sub – FH Freigabenachlauf bei tueroeffnen abbrechen
6 – Change value to On

Permanently disable comfort rear wiper system
If you do not like that every time you back up the rear wiper is started with this mod you can disable it.
1 – Electronic control module 09-. Code (31347)
2 – Adaptation
3 – Select – wiper
4 – Sub heck -Traenenwischen
5 – Change value on off

Rear wiper setting in the menu
This mod adds more function in the menu of the clean. You can choose to or not activate the automatic rear clean.
1 – Electronic control module 09-. Code (31347)
2 – Adaptation
3 – wiper
4 – Menuesteuerung konfortwischen HW
5 – Change value to On

———————————————————————————————————————

İÇ AYDINLATMA

Lighting intensity leds AACC / Climate
With this mod, you can change the intensity of illumination in the area of ​​climate control.
1 – Module 08 – Electronic air conditioning / heating
2 – Adaptation
3 – Select – Dimming_characteristic_2 (LED indicator)
4 – Change value Y4 21%
5 – Select – Dimming_characteristic_3 (LED fan)
6 – Change value Y4 12%
7 – Select – Dimming_characteristic_5 (Other LEDs)
8 – Change value Y4 10%

Footrest Light
This modification is for those who have the light of the footrests and put it on your own, be activated.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte30FR LC72
4 – Sub – Lichtfunktion E 30
5 – Change value to Interior Light

Ambient light blank door with reverse only Leon ?
With this mod, carrying the doors in red, when putting the reverse gear will go blank.
1 – Module 09 – Electronic control unit. Code (31347)
2 – Adaptation
3 – Select – Leuchte16BLK SLB35BLK SL KC9
4 – Submenu – Lichtfunktion G 16
5 – Change value to Rückfahrlicht
6 – Select – Leuchte16BLK SLB35BLK SL KC9
7 – Submenu – Dimmwert GH 16
8 – Change value to 0
9 – Select – Leuchte16BLK SLB35BLK SL KC9
10 – Submenu – Dimming direction GH 16
11 – Change value to Minimize
12 – Select – Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
13 – Submenu – Lichtfunktion C 17
14 – Change value to Rückfahrlicht
15 – Select – Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
16 – Submenu – Dimmwert CD 17
17 – Change value to 127
18 – Select – Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
19 – Submenu – Dimming direction CD 17
20 – Change value to Maximized

NOTE: Leuchte 16 is the red light (0 and minimized = 127 and maximized) and Leuchte 17 is white light (0 and minimized = 127 and maximized)

Ambient door light with flashing and color change only LEON?
With this mod, bringing the doors in red, when flashing, the door on the side of the indicator flashes between red and white.
1 – Module 09 – Electronic control unit. Code (31347)
2 – Adaptation
3 – Select – Leuchte16BLK SLB35BLK SL KC9
4 – Submenu – Lichtfunktion C
5 – Change value to Blinken links (beide Phasen) BOTH SIDES OF INTERMITTENT or Blinken links (Hellphase) ONLY WITH INTERMITTENT LEFT
6 – Select – Leuchte16BLK SLB35BLK SL KC9
7 – Submenu – Dimmwert CD
8 – Change value to 0
9 – Select – Leuchte16BLK SLB35BLK SL KC9
10 – Submenu – Dimming direction CD
11 – Change value to Minimize
12 – Select – Leuchte16BLK SLB35BLK SL KC9
13 – Submenu – Lichtfunktion E
14 – Change value to Blinken rechts (beide Phasen) BOTH SIDES OF FLASHLIGHTS or Blinken rechts (Hellphase) ONLY WITH RIGHT INTERMITTENT
15 – Select – Leuchte16BLK SLB35BLK SL KC9
16 – Submenu – Dimmwert EF
17 – Change value to 0
18 – Select – Leuchte16BLK SLB35BLK SL KC9
19 – Submenu – Dimming direction EF
20 – Change value to Minimize
21 – Select – Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
22 – Submenu – Lichtfunktion A
23 – Change value to Blinken links Hellphase
24 – Select – Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
25 – Submenu – Lichtfunktion B
26 – Change value to Blinken rechts Hellphase

Enable indicator Rear fog
With this modification we can visualize in the box snitch when we put the rear lights.
1 – Module 09 – Electronic. Code (31347)
2 – Extended coding (Mode Bytes)
3 – Byte 7
4 – Enable Bit 4

———————————————————————————————————————

DIŞ AYDINLATMA

Turn off the daytime running lights (DRL) with the parking brake
This modification is very interesting because it allows us to leave day lights (DRL) off while we have the hand brake with and without contact. Very useful in low battery.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Daytime Running Light
4 – Sub – Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten
5 – Change value to ON

Turn off daytime running lights (DRL) with light selector switch in position 0
This change is also very interesting because it allows you to leave the day off lights while wearing the light switch in zero position. It is compatible with the previous one.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Daytime Running Light
4 – Sub – Tagfahrlicht nur in Schalterstellung AUTO
5 – Change value to ON

Eliminate error LED lamps on the license plate
If you are thinking of putting leds on the license plate, this will avoid modification of the Fis you notice defective bulb.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte25KZL HA59
4 – Sub – Lasttyp 25
5 – Change value Allgemeine LED. 2 * default 5W
6 – Select – Leuchte25KZL HA59
7 – Sub – Dimmwert AB 25
8 – Change value to 127. Default 100

Remove error by mounting of LED lamp in front fog lamps
If you are thinking of putting LED on the front lights, with this modification you will avoid the mistake of bulb failure.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte13NL RB5
4 – Sub – Lassttyp 13
5 – Change value LED Lichtmodul
6 – Sub – Dimmwert AB 13
7 – Change value to 127
8 – Select – Leuchte12NL LB45
9 – Sub – Lassttyp 12
10 – Change value LED Lichtmodul
11 – Sub – Dimmwert AB 12
12 – Change value to 127

Change number of flashes of intermittent comfort
Very interesting for those who believe that comfort intermittent mode fall short with 3 flashes. The maximum value is 5 blinks.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Control of intermittent
4 – Sub – Komfortblinken blinkzyklen
5 – Change to the desired value – Maximum 5
6 – Reset factory settings on the screen lights Car

OPTION IN BOARD COMPUTER: Activate / deactivate daytime running lights(DRL) via CAR-setup menu
With this adjustment, you can switch daytime running lights through the CAR-setup menu.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Daytime Running Light
4 – Sub – Tagfahrlichtnur Aktivierung oder durch BAP Bedienfolge moeglich
5 – Verander waarde naar ON

Long flash burst together with the fog lamps
With this change each time you press the burst in the lights of your car, will light while the front fog lights.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte12NL LB45
4 – Sub – Lichtfunktion c 12
5 – Change value to Left high beam
6 – Select – Leuchte12NL LB45
7 – Sub – Dimmwert DC 12
8 – Change value to 100
9 – Select – Leuchte12NL LB45
10 – Sub – D 12 Lichtfunktion
11 – Change value to Lichthupe generell
12 – Select – Leuchte12NL LB45
13 – Sub – Dimming direction DC 12
14 – Change Value to Maximize
15 – Select – Leuchte13NL RB5
16 – Sub – Lichtfunktion c 13
17 – Change value Right high beam
18 – Select – Leuchte13NL RB5
19 – Sub – Dimmwert CD 13
20 – Change value to 100
21 – Select – Leuchte13NL RB5
22 – Sub – D 13 Lichtfunktion
23 – Change value to Lichthupe generell
24 – Select – Leuchte13NL RB5
25 – Sub – Dimming direction CD 13
26 – Change Value to Maximize

Activate front fog lamps when reversing
With this mod, when engaging reverse the front fog lights come on.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – static cornering light
4 – Sub – Bei rueckwaertsfahrt
5 – Change value to OFF

Deactivate the interior light when opening the trunk
With this change we will make the interior lights of the cabin is not light up when opening the boot.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Interior lighting
4 – Sub – Innenlicht bei offenem heckdeckel einschalten
5- Change value to Off

Enable third brake light when you open the trunk
With this modification, the third brake light turns on when you open the trunk.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte22BR MA57
4 – Sub – Lichtfunktion C 22
5 – Change value to Heckdeckel Offen
6 – Sub – Dimmwert CD 22
7 – Change value to 100

Ön Sis Lambalarında DRL  Aktivasyonu
With this modification the fog lights will come on together with the DRL to carry on.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte12NL LB45
4 – Sub – Lichtfunktion B 12
5 – Change value Daytime Running Lights
6 – Select – Leuchte13NL RB5
7 – Sub – Lichtfunktion B 13
8 – Change value Daytime Running Lights

DRL intensity (Halogen and Bi-Xenon Basic)
With this change we can adjust the intensity of the lights day as we like, considering that default come to 100 and the maximum value is 127.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte4TFL LB4
4 – Sub – Dimmwert AB 4
5 – Change the desired value. Default 100
6 – Select – Leuchte5TFL RB32
7 – Sub – Dimmwert AB 5
8 – Change to the desired value. Default 100
127 maximum allowed

DRL intensity lights dimmed mode (Halogen and Bi-Xenon Basic)
With this modification the DRL is gradually attenuated in the switching on and off.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte4TFL LB4
4 – Sub – Dimmwert EF 4
5 – Change the desired value. By default 40
6 – Select – Leuchte5TFL RB32
7 – Sub – Dimmwert EF 5
8 – Change to the desired value. By default 40
127 maximum allowed

Intensity lights DRL LED lights
With this change we can adjust the intensity of the lights day as we like, considering that default come to 100 and the maximum value is 127.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte2SL VLB10
4 – Sub – Dimmwert CD 2
5 – Change the desired value. Default 26
6 – Select – Leuchte3SL VRB21
7 – Sub – Dimmwert CD 3
8 – Change to the desired value. Default 26
127 maximum allowed

Flashing DRL Simultaneous with bi-xenon headlights Basic
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte4TFL LB4
4 – Sub – Lichtfunktion C4
5 – Change value to Not active
6 – Select – Lichtfunktion C 5
7 – Change value to Not active

Flashing lights DRL with LED simultaneous
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte2SL VLB10
4 – Sub – Lichtfunktion G 2
5 – Change value Blinken links Dunkphase
6 – Select – Leuchte2SL VLB10
7 – Sub – Dimmwert GH 2
8 – Change to the desired value
9 – Select – Leuchte2SL VLB10
10 – Sub – Dimming direction GH 2
11 – Change value to Minimize
12 – Select – Leuchte3SL VRB21
13 – Sub – Lichtfunktion G 3
14 – Change value Blinken links Dunkphase
15 – Select – Leuchte3SL VRB21
16 – Sub – Dimmwert GH 3
17 – Change the desired value
18 – Select – Leuchte3SL VRB21
19 – Sub – Dimming direction GH 3
20 – Change value to Minimize

Coming & Leaving Home Sis Farlarında Aktivasyonu
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Lighting comfort
4 – Sub – Coming home leuchten
5 – Change value to Fog light

Enable fog cornering (cornering function)
If your car does not carry activated the fog lights turn on curves, with this modification you can activate this feature.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte12NL LB45
4 – Sub – D 12 Lichtfunktion
5 – Change value to Abbiegelicht links
6 – Select – Leuchte12NL LB45
7 – Sub – Dimming direction DC 12
8 – Change Value to Maximize
9 – Select – Leuchte12NL LB45
10 – Sub – Dimmwert DC 12
11 – Change value to 100
12 – Select – Leuchte13NL RB5
13 – Sub – D 13 Lichtfunktion
14 – Change value to Abbiegelicht rechts
15 – Select – Leuchte13NL RB5
16 – Sub – Dimming direction CD 13
17 – Change Value to Maximize
18 – Select – Leuchte13NL RB5
19 – Sub – Dimmwert CD 13
20 – Change value to 100
Zie volgende post voor vervolg

Regulation of lights or turn corner
With this modification you can change the speed at which you want them to act the cornering. By default come to 40 km / h.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – static curve light
4 – Sub – Untere geschwindigkeitsschwelle
5 – Change the desired value
6 – Sub – Obere Geschwindigkeitsschwelle
7 – Change value to 60. Default 40 Km / h

Turn off lights or turn corner
With this modification you can disable cornering function.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte12NL LB45 (Left)
4 – Sub Lichtfunktion B 12
5 – Change value to Not Active
6 – Select – Leuchte13NL RB5 (Right)
7 – Sub Lichtfunktion B 13
8 – Change value to Not Active

Coming & Leaving Home Otomatik Aktivasyonu
With this modification the Coming and Leaving Home system is automatically activated.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Lighting comfort
4 – Sub – Coming home verbaustatus
5 – Change value to Automatic

Activate Coming Home without light rain sensor 
If you do not have rain sensor you can also activate the Coming Home with this modification.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Lighting comfort
4 – Sub – Coming Home Verbaustatus
5 – Change value to Automatic
6 – Sub – Menueeinstellung cominghome
7 – Change default value 20.Por 10 s
8 – Sub – Coming home Einschaltereignis
9 – Change value to Driver door
10 – Sub – Menuesteuerung coming home Werkseinstellung
11 – Change value to On
12 – Sub – Coming home leuchteng
13 – Change value Low beam

Coming Home & Leave Home – Include cornerings
With this modification you can include the cornerings to coming home and leave home.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Select – Leuchte8FL LB39
4 – Sub – Lichtfunktion H8
5 – Change value to leaving home Coming home oder aktiv
6 – Select – Leuchte8FL LB39
7 – Sub – Dimming direction GH 8
8 – Change Value to Maximize
9 – Select – Leuchte8FL LB39
10 – Sub – Dimmwert GH 8
11- Change value to 100
12 – Select – Leuchte9FL RB2
13 – Sub – Lichtfunktion H9
14 – Change value to leaving home Coming home oder aktiv
15 – Select – Leuchte9FL RB2
16 – Sub – Dimming direction GH 9
17 – Change Value to Maximize
18 – Select – Leuchte9FL RB2
19 – Sub – Dimmwert GH 9
20 – Change value to 100

coming home & leave home alone drl, without beam (halogen / xenon)
with this modification, only the drl will be active in the coming and leaving home.
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte6abl lc5
4 – sub – lichtfunktion c6
5 – change value to leaving home coming home oder aktiv
6 – select – leuchte6abl lc5
7 – sub – dimming direction cd 6
8 – change value to minimize
9 – select – leuchte6abl lc5
10 – sub – dimmwert cd 6
11 – change the desired value
12 – select – leuchte7abl rb1
13 – sub – lichtfunktion c 7
14 – change value to leaving home coming home oder aktiv
15 – select – leuchte7abl rb1
16 – sub – dimming direction cd 7
17 – change value to minimize
18 – select – leuchte7abl rb1
19 – sub – dimmwert cd 7
20 – change the desired value

coming home & leave home with led drl lights + xenon
with this modification drl + xenon + fog lights are active in the coming and leaving home.
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – lighting comfort
4 – sub – coming home leuchten
5 – change value to fog lights
6 – select – leuchte12nl lb45
7 – sub – lichtfunktion e 12
8 – change value oder coming home leaving home aktiv
9 – select – leuchte12nl lb45
10 – sub – dimmwert ef 12
11 – change the desired value

coming home & leave home also third brake light
with this modification, the third brake light is active in the coming and leaving home.
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte22br ma57
4 – sub – lichtfunktion b 22
5 – change value to leaving home coming home oder aktiv

coming home & leave home also inside. Led drivers
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte27nsl rc6
4 – sub – lichtfunktion b 27
5 – change value to leaving home coming home oder aktiv

coming home & leave home also inside. No led drivers
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte24sl hra65
4 – sub – lichtfunktion b 24
5 – change value to leaving home coming home oder aktiv
6 – select – leuchte23sl hlc10
7 – sub – lichtfunktion b 23
8 – change value to leaving home coming home oder aktiv

activate coming home to open the driver’s door
with this modification, the coming home can be activated when you open the driver’s door.
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – lighting comfort
4 – sub – coming home einschaltereignis
5 – change value to drivers door

parking light position also inside. No led car drivers closed
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte23sl hlc10
4 – sub – lichtfunktion h 23
5 – change value to parklicht links
6 – select – leuchte23sl hlc10
7 – sub – dimming direction gh 23
8 – change value to maximize
9 – select – leuchte23sl hlc10
10 – sub – dimmwert gh 23
11 – change value to 28
12 – select – leuchte24sl hra65
13 – sub – lichtfunktion h 24
14 – change value parking light right
15 – select – leuchte24sl hra65
16 – sub – dimming direction gh 24
17 – change value to maximize
18 – select – leuchte24sl hra65
19 – sub – dimmwert gh 24
20 – change value to 28

parking light position also inside. Car led drivers closed
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte27nsl rc6
4 – sub – lichtfunktion b 27
5 – change value parking light right

fog lights with cornering together to put intermittent
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – static cornering light
4 – sub – vorschrift
5 – change value to fmvss 517 108. By default ece r119

activate tail light (gate) to open the trunk. (led drivers)
with this modification to open the trunk, lights that go in the gate will light ..
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte23sl hlc10
4 – sub – hd lichtansteuerung ab 23
5 – change value to always
6 – select – leuchte24sl hra65
7 – sub – hd lichtansteuerung ab 24
8 – change value to always

activate tail light (gate) to open the trunk. (led drivers)
with this modification to open the trunk, lights that go in the gate will light ..
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte26nsl la72
4 – sub – hd lichtansteuerung ab 26
5 – change value to always
6 – select – leuchte27nsl rc6
7 – sub – hd lichtansteuerung ab 27
8- change value to always

turn on led rear lights together with drl 
with this adjustment, the rear led lights automatically switch on when switching on drl illumination.
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – daytime running light
4 – sub – tagfahrlicht dauerfahlicht aktiviert zusaetzlich standlicht
5 – verander waarde naar on

activate rear fog with the trunk open. (no led drivers)
with this modification we can make the rear fog lights turn on when you open the trunk.
1 – module 09 – electronic
2 – adaptation
3 – select – leuchte26nsl la72
4 – sub – hd lichtansteuerung ab 26
5 – change value to always

red light in all driving modes
with this modification, the lights of the doors will always be red in all driving modes.
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte17tfl srb3tfl r r blk blk sr kc3
4 – sub – lichtfunktion a 17
5 – change value to off
6 – select – leuchte16blk slb35blk sl kc9
7 – sub – lichtfunktion b 16
8 – change value to environmental luz 3

drl against appr phase with bi-xenon front lights and halogen
with this modification you can make do the following: When the flashing light drl are off and when the indicator is off the drl light. It is very cool.
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte4tfl lb4
4 – sub – lichtfunktion c4
5 – change value not active
6 – select – leuchte4tfl lb4
7 – sub – dimmwert gh 4
8 – change to the desired value
9 – select – leuchte4tfl lb4
10 – sub – lichtfunktion g 4
11 – change value blinken links hellphase
12 – select – leuchte4tfl lb4
13 – sub – dimming direction gh 4
14 – change value to minimize
15 – select – leuchte5tfl rb32
16 – sub – lichtfunktion c 5
17 – change value not active
18 – select – leuchte5tfl rb32
19 – sub – dimmwert gh 5
20 – change the desired value
21 – select – leuchte5tfl rb32
22 – sub – lichtfunktion g 5
23 – change blinken value rechts hellphase
24 – select – leuchte5tfl rb32
25 – sub – dimming direction gh 5
26 – change value to minimize

against stage lights drl with led lights appr forward
with this modification you can make do the following: When the flashing light drl are off and when the indicator is off the drl light. It is very cool.
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte2sl vlb10
4 – sub – lichtfunktion g 2
5 – change value blinken links hellphase
6 – select – leuchte2sl vlb10
7 – sub – dimmwert gh 2
8 – change to the desired value
9 – select – leuchte2sl vlb10
10 – sub – dimming direction gh 2
11 – change value to minimize

rear lights flashing in sequence mode (led drivers)
1 – module 09 – electronic. Code (31347)
2 – adaptation
3 – select – leuchte16blk slb35blk sl kc9
4 – sub – lichtfunktion a 16
5 – change value blinken links hellphase
6 – select – leuchte17tfl srb3tfl r r blk blk sr kc3
7 – sub – lichtfunktion a 17
8 – change value blinken links hellphase

———————————————————————————————————————

SİSTEM

sensitivity hill start assistant
we can modify the way the wizard acts hill start adapting to our needs or habits.
1 – module 03 – electronic brake. Code (40168/20103)
2 – adaptation
3 – select – start assist slope
4 – activate one of the three options:
– normal (default)
– advance
– time delay

tilt hill start assistant
with this modification we can change when we want to be activated depending on the steepness of the slope.
1 – module 03 – electronic brake. Code (40168/20103)
2 – adaptation
3 – select – start assist slope, slope limit
4 – change the value you want.
A higher value more inclination required for activation
default 3%

disabling pending support assistant
with this modification we can cancel the pending help system.
1 – module 03 – electronic brake. Code (40168/20103)
2 – extended coding
3 – byte 16
4 – enable bit 0

expanded xds electronic differential lock
we may change the way it works, you can choose between several values ​​in a way that best suits our driving.
1 – module 03 – electronic brake. Code (40168/20103)
2 – adaptation
3 – select – electronic differential lock expanded
4 – activate one of the five options:
– standard (default)
– central
– not activated
– weak
– strong

esp depending on the speed
applying this modification can activate the esp function acting on the speed that take the vehicle or the value is always fixed.
1 – module 03 – electronic brake. Code (40168/20103)
2 – adaptation
3 – select – electronic stability program
4 – select one of the two options:
– activation function of speed
– not enabled (default)
– activated

ESP ve ASR Pasifleştirme and asr
1 – module 03 – electronic brake. Code (40168/20103)
2 – basic settings
3 – select – deactivation esp and asr
4 – select one of the two options:
– not enabled (default)
– activated

activate the warning of speeding and at what speed
with this modification you can activate the speed warning and at what speed. It can be done on the screen.
1 – module 17 – code box instruments- (25327)
2 – extended coding
3 – byte 0
4 – enable bit 6
another way :
1 – adaptation
2 – select – speed ​​warning
3 – select one of the two options:
– activated
– off (default)
4 – change value in kilometers per hour to the desired

enable display driver profiles at startup
if your car is driving profiles, with this mod, every time you boot it will show in the fis how you are without having to look at the screen.
1 – module 19 – diagnosis interface for data bus. Code (20103)
2 – extended coding (byte mode)
3 – byte 8
4 – activate bit 4

Hızlanma Güçlendirme – Gaz Tepkimesi Arttırma
1 – module 44 – power steering. Code (unknow)
2 – adaptation
3 – select – switching driving profile
choices :
A – gradual, controlled by time
b – directly controlled threshold value

driver profile – driving modes
with this mod, you can change the behavior of the car, in dynamic mode behaves somewhat more cheerful in the reactions.
1 – module 44 – power steering. Code (unknow)
2 – adaptation
3 – select – lines features power steering
choices :
– button for selecting the driving profile
– comfort
– dynamic
– automatic
– default

drying the brake discs
our cars have a brake drying system which acts each time you start the car for a fixed time.
1 – module 03 – electronic brake. Code (40168/20103)
2 – adaptation
3 – select – drying brake discs
4 – activate one of four options:
– central (default)
– not activated
– weak
– strong

reset settings tires
if you take time with your car and you were adjusting the pressure and want to adjust them to the factory settings, you can do so using this modification.
1 – module 03 – electronic brake. Code (40168/20103)
2 – basic settings
3 – select – rest. Factory settings control indicator tires
4 – select the desired option
– not enabled (default)
– activated

disable mode transport
1 – module 19 – diagnosis interface for data bus. Code (20103)
2 – adaptation
3 – mode of transport
– off (default)
– activated

dynamic adaptation brake release
with this mod, we can make our vehicle snatch a little more to the rally. Strong default being prevents wheel spin at the start.
1 – module 03 – brake electronics. Code (40168/20103)
2 – adaptation
3 – anti-skid control in acceleration – options: (on – not activated)
4 – motor drive torque adjustment – options: (activated – not activated)

———————————————————————————————————————

GÖSTERGE PANELİ

Kadran Selamlama
with this mod, by making contact makes the staging or test needle, is a very striking mod.
1 – module 17 – code box instruments- (25327)
2 – extended coding
3 – byte 1
4 – enable bit 0

chronometer in fis \ laptimer!
with this mod, you will add a timer in the fis.
1 – module 17 – code box instruments- (25327)
2 – extended coding
3 – byte 1
4 – enable bit 3

fis liters refueled
with this mod, you will add the function of liters you have to refuel.
1 – module 17 – code box instruments- (25327)
2 – extended coding
3 – byte 10
4 – enable bit 4
it shows the liters of 5 in 5. Full deposit = 45 liters, full tank shows three stripes.

Emniyet Kemeri Uyarısı İptali
1 – module 17 – code box instruments- (25327)
2 – extended coding
3 – byte 1
4 – disable bit 1
another way :
1 – adaptation
2 – select – disable belt warning
3 – select one of the two options:
– no (default)
– yes

fis oil temperature ->by default in fr
with this mod, you add the oil temperature in the fis
1 – box module 17- instruments- code (25327)
2 – extended coding
3 – byte 10
4 – enable bit 1
another way :
1 – adaptation
2 – select – display of oil temperature
3 – select one of the two options:
– yes (default)
– do not

fis compass (bearing browser)
with this mod, you will add the compass in the fis (only if you have other browser)
1 – box module 17- instruments- code (25327)
2 – extended coding
3 – byte 10
4 – enable bit 6
another way :
1 – coding extended (text mode)
2 – navigation / compass – switch to si
3 – indicator compass — lower position (change what you want)

digital odometers in fis
with this mod, you add the digital speedometer in the fis (you have to select it on the screen of settings)
1 – module 17 – code box instruments- (25327)
3 – adaptation
4 – select – digital tachometer
5 – select one of three options:
– indication
– no indication
– not available

personal consumption adjustment display fis
with this mod, you can calibrate consumption if you see that do not fit what you think.
1 – module 17 – code box instruments- (25327)
2 – adaptation
3 – select- correc.del indic.de consumption / combustion scope – options: (100%)
4 – change value. Default 100%
5 – the adjustment allows increments of 1%, maximum and minimum values ​​are 85 (%) and 115 (%).

Activate carbon background Infotainment
With this mod, change the background screen infotainment to Carbon mode.
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Extended Code (Text mode)
3 – Byte 17 Skinning
4 – Select Skin 3

Change Home Screen
With this mod, we change the screen that starts the infotainment.
1 – Module 17 – Code Box instruments- (25327)
2 – Extended Coding (Text mode)
3 – Select – Initial Screen
4 – Select one of eight options
– Option 1 (default)
– Rest

Activating Driving Mode menu Car / CAR
With this mod, we activate a new screen infotainment. driving school mode. It is a pijada, does not show too much,
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Adaptation
3 – Select – Car Function Adaptations Gen 2
4 – Search submenu – Menu display driving school
5 – Change value to ON
6 – Without leaving the submenu search – Menu display driving school over threshold
7 – Change value to ON
8 – Select – Car List Function CAN Gen 2
9 – Search submenu – Driving school
10 – Change value Available
11 – Search submenu – Driving school bus msg
12 – Change value comfort databus

DRL control from the CAR menu
With this mod, we activate a new option in Settings-lights where we can activate or deactivate the DRL.
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – Daytime Running Light
4 – Tagfahrlicht Aktivierung oder durch BAP bedienfolge moeglich
5 – Change value to On

Change radio logo (FR, Cupra, Ecomotive)
With this mod, you can change the initial logo.
1 – Module 5F – Information Electronics 1. Code (20103)
2 – Adaptation
3 – Byte 18 Screenings
Value in 0 – Seat Normal
Value in 1 – Seat FR
Value in 2 – Seat Cupra
Value in 3 – Seat Ecomotive
Value in 5 – Seat Xperience
Value in 6 – Seat FR Line

Rear wiper on screen
With this mod, we activate the comfort mode back clean
1 – Module 09 – Electronic. Code (31347)
2 – Adaptation
3 – wiper
4 – Menuesteuerung konfortwischen HW
5 – Change value to On

Engineer mode or Green Menu
With this mod, we activate the engineer mode. Vallais be careful not to roll.
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Select CHANGE SERVICE
3 – development mode.
4 – Adaptation
5 – Development Mode
6 – Change to On.
– Restart Infotainment
– Hold the Menu button and hold until you exit the menu updates and not let go until you exit the menu engineer.

Change system language
With this mod, we can change the system language.
1 – Module 17 – Code Box instruments- (25327)
2 – Adaptation
3 – Select – Language
4 – Select language

Menu Display Compass – OFF ROAD WITH AND WITHOUT NAVI
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Adaptation
3 – Select – Car Function Adaptations Gen 2
4 – Search submenu – Menu compass display (ON)
5 – Search submenu – Menu display compass over threshold (ON)
6 – Select – Car Function List Bap Gen 2
7 – Search submenu – Compass 0x15 (ON)
8 – Search submenu – 0x15 Compass msg bus (data bus comfort)
9 – Byte 24 Navigation System
10 – Change value to On.
This mod does not allow all functions without NAVI.
Logically altitude and compass does not display data.
Also reports a fault in the module 5F saying that environmental data missing
(Only reports to do analysis with OBDeleven, nothing comes on screen)
A normal error and do not have to worry.
With NAVI everything works 100%
If you want me to show the angle of rotation of the wheels on this menu you have to make the mod Slope Angle of View menu.

Menu Display Angle of Slope – angle of rotation of the wheels 
With this modification you can add new functionality to Mod OFFROAD Display Menu.
By itself does not work, you must have activated the OFFROAD menu.
We will show graphically the angle of rotation of the wheels to turn the wheel.
1 – Module 5F – Electronic Information 1. Code (20103)
2 – Adaptation
3 – Select – Car Function Adaptations Gen 2
4 – Search submenu – Menu display angle of stope (ON)
5 – Search submenu – Menu display angle of stope over threshold (ON)
6 – Select – Car Function List Bap Gen 2
7 – Search submenu – Angle of stope 0x24 (ON)
8 – Search submenu – 0x24 Angle of stope msg bus (data bus comfort)

Displays temperature
With this mod we can change emperature degrees Celsius to Fahrenheit
1 – Module 17 – Code Box instruments- (25327)
3 – Extended Coding
4 – Temperature
5 – Select one of the two options:
– Celsius degrees
– Fahrenheit degrees

Install OEM Rear Camera
Necessary items: OEM NTSC camera, connectors for the Quadlock.
Install the camera by connecting the original cables of the ceiling to the cables of the light of the new ceiling.
Feed the camera directly from the cigarette lighter or from fuses.
Connect the signal cables to the Quadlock (Blue Connector) Where the PIN 6 is the positive and the PIN 12 is the video mass.

1 – Module 5F
2 – Coding (bytes mode)
3 – Byte 19 – Activate bit 4

Another way:
1 – Coding (text mode)
2 – Byte 19 Rear View Low — Set it to On

Set / Disable Sound Generator Only Available on Cupra Models
1 – Aanpassing – Channel 10
2 – IDE04472 -. Volume d actuator voor mechanische trillingen
3 – Environment: 0,0% (Soundgenerator Deactivated) – Alternative
: elke% Enter – Standard: 100% (% Value refers to sports mode)
4 – Set value refers to the sport mode, in normal mode, the sound generator only works in a certain relation with the individual value (about 1/3 – 50%)