Kategori arşivi: VAG Kodlamalar

Skoda Superb II Vag Com Kodları

Kadran Selamlama

1.STG 17 (dash panel insert)
2.STG adjustment -> function 10
3.Staging / staging aktive edin

 

XDS(Elektronik Diferansiyel Kilidi) Aktifleştirme

1.STG 03 (brake)
2.STG Lange Coding -> Function 07
3.Byte 17
4.Bit 3 seçin

 

Cama Su Püskürtüldükten sonra Sileceklerin 2 Saniye Sonra 1 Kez daha Çalışması

1.STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 1
4.Bit 3 aktifleştirin
5.Byte 21
6.Bit 4 aktifleştirin

 

Gündüz Farlarının Parlaklığını/Işık Şiddetini Ayarlama

2011 yılına kadar olan araçlarda

1.STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 8 / 1A = 25%
Byte 8/32 = 50%
Byte 8 / 3C = 60%
Byte 8 / 4B = 75%
Byte 8/00 = 92% varsayılan
Byte 8/64 = 100%

2012 yılından sonraki araçlar

1.STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 24 / 1A = 25%
Byte 24/32 = 50%
Byte 24 / 3C = 60%
Byte 24 / 4B = 75%
Byte 24/00 = 92% varsayılan değer
Byte 24/64 = 100%

 

Gündüz Sürüş Farlarını Özelleştirme:

1.STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 15 Bit 6 (TFL separate lights – LED)
Byte 24 Bit 7 (TFL as a position light)
Byte 27 Bit 2 (TFL as a sidelight – is dimmed when low beam)
Byte 18 to 04 HEX

 

Geri Viteste Sağ Aynanın Aşağı İnmesi:

1.STG 52 (Türelektr. Beifahr)
2.STG coding -> function 07
3.Byte 4
4.Bit 2 ve 3 ü aktifleştirin

 

Far Yıkama Sisteminin Ayarlanması:

1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 20
4.Disable Bit 5
More customization options regarding headlamp cleaning system.:
Headlight washers (SWRA) adapt Ansteuerverzögerungszeit:
1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 05
4.Adjust accordingly delay time. (Resolution 50 ms)
Headlight washers (SWRA) adjust driving time:
1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 06
4.Adjust accordingly delay time. (Resolution 50 ms)

 

“Rain Close” Aktifleştirme (Yağmur Yağdığında camlar ve açılır tavanın otomatik kapanması)

1.STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 4
4.Bit 5 ve 6 yı aktifleştirin
5.STG 09 (vehicle power)
6.STG long coding -> function 07
 Rain ve light sensor seçin – RLS
7.Byte 0
8.Bit 2 yi aktifleştirin

 

Sis Lambalarını Gündüz Farı Gibi Kullanma:

In the central electrics You have the option at the Skoda Superb 3T to activate the fog lights as daytime running lights
The following code is to be applied:
1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 14
4.Enable Bit 1
More customization options regarding daytime running lights.:
Daytime running light inactive when the handbrake
1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 11
4.Enable Bit 0

Daytime running active only in light switch position AUTO:
1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 26
4.Enable Bit 4

Daytime running tale available:
1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 26
4.Enable Bit 5

 

Tek Dokunuş Sinyal Sayısını Değiştirme

In the central electrics You have the option at the Skoda Superb 3T adjust the Zylkus of comfort blinker. Value range 1-5 possible (ie between 1x or 5x flashes per tap)
The following code is to be applied:
1.Select STG 09 (vehicle power)
2.STG adjustment -> function 10
3.Channel 13
4.Adjust Value: 1-5 Value 3 (standard – 3x blinking)

Ani Frende Dörtlülerin de Yanması:

In the network control unit gives you the option when Skoda Superb 3T Notbremsblinken the property via Blink – and brake lights (Adaptive Brake Light) activate
The following code is to be applied:
1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 16
4.Enable Bit 1
5.Bit 2 Activate additionally possible: even when towing a trailer possible
6.Byte 23
7.Enable Bit 5

 

Emniyet Kemeri Uyarısı

In the dash panel insert (KI) gives you the option when Skoda Superb 3T deactivate the seat belt reminders

The following code is to be applied:

1.Select STG 17 (dash panel insert)
2.STG Lange Coding -> Function 07
3.Byte 1
4.Disable Bit 1

Yokuş Kalkış Desteği’nin Süresini Ayarlama:

In braking and ABS control unit gives you the option when Skoda Superb 3T adjust the function of the Hill Hold Assistant (Hill Start Assistant)

Coding:

1.Select STG 03 (brake / ABS)
2.STG adjustment -> function 10
3.Select Berganfahrhilfe or channel 58
4.Fit Function:
0 = Berganfahrhilfe “normal”
1 = Berganfahrhilfe “early” (starting at low speed)
2 = Berganfahrhilfe “late” (starting at a higher speed and a slipping clutch) <- for example, towing

 

Emniyet Kemeri Uyarısı

1.STG 17 (dash panel insert)
2.STG Lange Coding -> Function 07
3.Byte 1
4.Bit 1 pasifleştirin

Yokuş Kalkış Desteği’nin Süresini Ayarlama:

1.STG 03 (brake / ABS)
2.STG adjustment -> function 10
3.Select Berganfahrhilfe or channel 58
4.Fit Function:
0 = Berganfahrhilfe “normal”
1 = Berganfahrhilfe “early” (starting at low speed)
2 = Berganfahrhilfe “late” (starting at a higher speed and a slipping clutch) <- for example, towing

 

Yüksek süratlerde farlar için otoban modunu aktifleştirmek:

In the network control unit gives you the option when Skoda Superb 3T activate the motorway light. At high speed, then the illumination of xenon is adjusted automatically – the light cone is narrower in width and thus longer.
Motorway mode uses the large amount of light and optimized side and ground lights of the xenon plus pig launcher. Using sensors, a vehicle electronic system continuously analyzes the speed of the vehicle. After a short time above 110 km / h the system is based on highway driving and automatically switches from low beam mode in motorway light mode. The special position of the diaphragm in the xenon plus headlights additional light will be focused by an aluminum reflector and thrown far ahead of the vehicle without dazzling other road users, however. The sight is more than doubled: from 70m in low beam mode at 150m motorway light mode. This increase in the visibility means at a speed of 130 km / h has a gain of 2 seconds to react to objects in front of the vehicle can. Motorway mode thus increases driving safety significantly.
The following code is to be applied:
1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Subsystem: Rain / Light Sensor
4.Byte 02:
+01 For motorway light
+02 for rain light (if both are required thus: 03 as HEX entry)

-Otomatik Kilitleme ve Kilit Açma:
In the central electrics You have the option at the VW Golf VI, the automatic locking and unlocking of the car to activate or deactivate

The following code is to be applied:

1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 0
4.Bit 1 (Auto-Unlock)
5.Bit 2 (Auto-Lock)

Fren Yardımcısını Ayarlamak:

In the braking electronics gives you the option when Skoda Superb 3T adjust the brake assist. Thus, the response of the brake pedal changes. (delayed faster)

The following code is to be applied:

1.Select STG 03 (brake electronics)
2.STG adjustment -> function 10
3.Channel 9
4.Value 2 change (default: 0)

Gündüz farlarını kapatmak:

In the central electrics You have the option at the Skoda Superb 3T turn off or disable the default daytime running lights

The following code is to be applied:

1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 11
4.Disable Bit 2

 

Aracı kilitlerken kornanın çalması:

In the central electrics You have the option at the Skoda Superb 3T the DWA to acknowledge (alarm system) when unlocking and locking the vehicle with the horn (so-called US -. Style)

The following code is to be applied:

1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 5
4.Enable Bit 1
5.Enable Bit 4
: additionally possible to make DWA acknowledgment in the comfort menu visible
1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 5
4.Disable Bit 2
Adaptation of DWA:
1.Select STG 09 (vehicle power)
2.STG adjustment -> function 10
3.Channel 3
4.Value set in accordance with 0 = frequency modulated alarm signal 10 Tamperalarme (USA 5min) 1 = intermittent alarm signal 10 Tamperalarme (EU, 5min) 2 = frequency modulated alarm signal 1 tamper alarm (USA, 30s) 3 = intermittent alarm signal 1 tamper alarm (EU, 30s)

Köşe dönüş farlarını aktive etmek:

In the central electrics You have the option at the Skoda Superb 3T to activate the cornering light. It is then driven through the fog lights.

The following code is to be applied:

1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 14
4.Enable Bit 7
additionally possible: limit cornering time
1.Select STG 09 (vehicle power)
2.STG Lange Coding -> Function 07
3.Byte 12
4.Enable Bit 4

 

Columbus’ta hareket halinde video izlemek:

1.Ignition and engine on
2.Insert DVD and start the desired movie
3.On the steering wheel, press the voice button (who has no MFL, pressed a pinch the small “i” button on the top right of the speaker icon at the RNS) -> 3-tone chime sounds
4.Immediately on the RNS 510 “TONE” button (bottom left) -> Gong and another signal sounded together
5.The frame of the movie will freeze briefly and plays after half a second further
6.Start driving!
DANGER
§When changing the radio mode – whether via button or voice command (NAV, MAP, …) this activation is automatic, so disabled will be reset to the original setting!
§To reactivate the vehicle must again resting (so think twice before)!
§Navigation and DVD-activation function together perfectly and without sacrificing speed, normally plan a route just before this intervention and start route guidance!
§The activation has on all other controls and displays in the MFA + no influence!
Function depends on the firmware version of RNS510. Works for 2660 and 2680

Columbus Gizli Menüyü Açmak:

In the navigation control unit gives you the option when Skoda Superb 3T unlock the hidden menu of RNA 510th

The following code is to be applied:

1.Select STG 37 (navigation)
2.STG adjustment -> function 10
3.Channel Number 50
4.New to this set: 1
5.RNS reset
6.The hidden menu can be opened with the key combination Setup (hold very long pressed -> see also video)

Polo Ibiza Fabia ABS ESP Uzun Kodlama

ESP8,2 ve ESP9,0 sistemleri için long coding menüsünde kodların karşılıkları aşağıdadır

ESP8,2
0 Byte, define the model of the car and the body type: 21 – Polo hatch; 51 – Polo sedan; 41– Fabia;
1 Byte, define the model of the car too: 01– Fabia; 02 – Polo;
2 Byte, define the brake types:

  • 24 – if the front 256mm disk and rear 200mm drum
    28 – if the front 256mm disk and rear 232mm disk
    44 – if the front 288mm disk and rear 200mm drum
    48 – if the front 288mm disk and rear 232mm disk

3 Byte, unknown. DB – Fabia; C2 – Polo
4 Byte, transmition type: 41 – automatic; 21 manual
5 Byte, depends on 13th digit of the VIN (see below)
6 Byte, unknown . 00
7 Byte, depends on 14th digit of the VIN (see below)
8 Byte, binary inverted value of the 0 Byte: 84 – Polo hatch; 8A – Polo sedan; 82– Fabia
9 Byte, depends on 15th digit of the VIN (see below)
10 Byte, binary inverted value of the 2 Byte: (24/14/22/12)
11 Byte, depends on 16th digit of the VIN (see below)
12 Byte, binary inverted value of the 4 Byte: (82/84)
13 Byte, depends on 17th digit of the VIN (see below)
14 Byte, binary inverted value of the 6 Byte: 00
15 Byte, define the engine type and steering wheel side:

  • 40 – BXW/CGGB/CBZB/CGPA/CBZA/CHFA/CFNA left-side steering wheel
    42 – CAYB left-side steering wheel
    52 – CFWA left-side steering wheel

16 Byte, define additional functions: 10 – default

  • Bit 0 – Hill Hold Control (HHC) activation
    Bit 1 – Tire Pressure Monitoring (RKA) activation
    Bit 2 – XDS activation

17 Byte, unknown 00

Image

ESP9,0
0 Byte, define the model of the car and the body type: 21 – Polo hatch; 51 – Polo sedan;41 – Fabia
1 Byte, define the model of the car too: DD – Polo;DC – Fabia
2 Byte, define the brake types:

  • 2C – if the front 256mm disk and rear 200mm drum
    28 – if the front 256mm disk and rear 232mm disk
    44 – if the front 288mm disk and rear 200mm drum
    48 – if the front 288mm disk and rear 232mm disk
    68 – if the front 310mm disk and rear 232mm disk
    78 – if the front 310mm disk and rear 254mm disk

3 Byte, unknown. 85 – Polo hatch 64 – Polo sedan;7D – Fabia
4 Byte, transmition type: 41 – automatic; 21 manual
5 Byte, depends on 13th digit of the VIN (see below)
6 Byte, unknown . 00 – Polo hatch; 07 – Polo sedan;08 – Fabia
7 Byte, depends on 14th digit of the VIN (see below)
8 Byte, binary inverted value of the 0 Byte: 84 – Polo hatch; 8A – Polo sedan; 82– Fabia
9 Byte, depends on 15th digit of the VIN (see below)
10 Byte, binary inverted value of the 2 Byte: (34/14/22/12/16/1E)
11 Byte, depends on 16th digit of the VIN (see below)
12 Byte, binary inverted value of the 4 Byte: (82/84)
13 Byte, depends on 17th digit of the VIN (see below)
14 Byte, binary inverted value of the 6 Byte: (00/E0/10)
15 Byte, define the engine type and steering wheel side:

  • 40 – BXW/CGGB/CBZB/CGPA/CBZA/CHFA/CFNA left-side steering wheel and not sure below for this byte
    42 – CAYB left-side steering wheel52 – CFWA left-side steering wheel

16 Byte, define additional functions:

  • 08 – default with ESP-button deactivates ASR only
    14 – default with ESP-button deactivates ESC fully

    • Bit 0 – Hill Hold Control (HHC)activation

17 Byte, define additional functions: 00 – default
Bit 0 – Tire Pressure Monitoring (RKA) activation
Bit 2 – XDS activation

 

ESP 8.2 codings (lhd)
210224E3416F00B3842D24E882D400521300 1.2 TDI
210228E3436E00B6842B14E8C2D100421300 1.6 TDI
210228E3216D00B5842814EA84D300401300 1.2 TSI CBZC ciclo
210228E3217200B4842514E884D400401300 1.2 TSI CBZB
210248E3416F02B4842812E482D740411700 GTI DSG
230248E3416F02B3C42C12E382D140811700 GTI DSG (rhd)*

———————————————————————-

ESP 9.0 codings (lhd)
21DD4885232700C48416126AC45900400905 1.2 TSI
21DD2885412C00C8841C146F825900520905 1.6 TDI
21DD4885432A00C4841C1272C25800550905 BlueGT
21DD6885432C02C5841D166FC252404D0905 GTI DSG
21DD7885432C02C6841B1E69C257404D0904 WRC

Vag Com Security Access Kodları

Vag com cihazı ile VW Skoda Seat Audi marka araçlarda yapılacak kodlama işlemlerinde özel kodlamalar ve ayarlamalar için güvenlik kodu gerekmektedir. Bu kodlar kodun girileceği kutucuğun üzerine gelindiğinde otomatik olarak gelirken bazı durumlarda bu kod mevcut olmamakta. Bu durumlar için gerekli olan kodlar şunlar

 

ENGINE
TDI Engine adaptation login = 12233 ( 4 cylinder MSA12 and newer)
EDC17 Security Access code =  12233
EDC15/16 Fuel cooling Activation code =  10000
EDC15/16 Fuel cooling De- activation code =  10001
Delete FMA Learning map  = 10008
Switched EGR off  for next driving cycle = 10011
DPF emergency regeneration V6 = 10016
DPF emergency regeneration 4 Cyl  = 21295
Legal top speed limiter disable (AP07) = 28575
Teach differential pressure transmitter = 30605

UDS Short Trip password = 27971
ME7 ECU Login Codes =  07825
ME7 ECU Login Codes = 01283
ME7 ECU Login Codes = 11500   Default coding
ME7 ECU Login Codes = 11223
ME7 ECU Login Codes = 11463
ME7 ECU Login Codes = 11501
ME7 ECU Login Codes = 12233
ME7 ECU Login Codes = 33162
Other  ECUs = 26262
Golf 1,6  FSI  = 10011
Login codes for engine type AEL = 22158
Common Rail – disable top speed limiter = 10111
01283 Cruise Activation “older” vehicles
Activate ACC = 10002
Diesel particulate filter Adaptation  = 10016
Cruise Control Activation  = 11463
Diesel particulate filter Adaptation = 21295
Special Customer Services login = 45678

ABS

Adaptation access  MK60 = 00212
Adaptation access  NDBW = 01025
Adaptation access  DBW = 04097
Adaptation access  SPECIAL A6 = 09399
Adaptation access  FWD = 13204
Adaptation access AWD = 13504
Adaptation access  AWD ESP = 18446
Adaptation access  MK60 = 19469
Adaptation access  FWD ESP = 23049
Adaptation access  General = 27861
Adaptation access to basic settings = 40168

AIRBAG

Airbag Adaptation Enabling login = 20324

INSTRUMENT

Instrument Cluster Adaptation Login = 13861

CENTRAL ELECTRONICS

Central Electronics Adaptation Enabling login = 21343
Activate Cruise Control Adaptation Login = 11463
De-activate Cruise Control Adaptation Login = 16167
Activate Cruise Control Adaptation = 13647
NB! The  Cruise Control System  activation  Drive-by-Wire throttle systems will vary for different engine types.

STEERING

Steering Angle Sensor Adaptation Login = 40168

SUSPENSION

General Login = 31564
Transport Adaptation Activation = 10273
Transport Adaptation de-activation = 41172

Seat Ibiza 6J (2009-2016) Vag Com Kodları

Servis Çağrısı Sıfırlama

– Modül 17 – Kod Kutusu cihazları – (25327)
– Uyarlamalar
– Seç – PIM: Prolog.interv.mant’ı yeniden başlat
– Üç seçenekten birini seçin:
– Uyarı yok (varsayılan)
– Aktif bildirim
– Sıfırla

KM ile Servis Çağrısı Sıfırlama

– Modül 17 – Kod Kutusu cihazları – (25327)
– Uyarlama
– Seç
– Sabit: Sonraki máx.hasta kilometre devir sayısı.
– İstediğiniz değeri değiştirin. Varsayılan 30000
– SABİT: Resposic değeri. Próx.inspecc. Km’ye bağlı olarak
– İstenen değere değiştirin. Varsayılan 30000
– KM-iletimi kilometre / PIM’in maksimum PIM değeri
– İstenen değeri değiştirin. Varsayılan 30000
– PIM: km uzunluğundaki kumsal hüküm / minimum değer değeri
– İstenen değeri değiştirin. Varsayılan 15000
– SIA: máx.de servisine yolculuk
– İstediğiniz değeri değiştirin. Varsayılan 15000

Zamana Göre Servis Çağrı Mesajı Sıfırlama

– Modül 17 – Kodlu Kutular – (25327)
– Uyarlama
– Seç
– Sabit: Süre má.hsta sonraki devir. Zamana bağlı olarak
– İstediğiniz değeri değiştirin. 730 varsayılan d
– SABİT: reposic.próx inspecc.en zamanın fonksiyonu
– İstenilen değere değiştirin. Varsayılan 365 d
– PIM revizyonları arasında geçen sürenin maksimum değeri
– İstenen değeri değiştirin. 730 varsayılan d
– PIM: revizyonlar arasında geçen sürenin minimum değeri
– İstenen değeri değiştirin. Varsayılan 365 d
– SIA: daha uzun süreli servis
– İstenen değeri değiştirin. Varsayılan 365 d

 

Alarmı Etkinleştirme

– Modül 09 – Elektronik kontrol ünitesi. Kod (31347)
– Genişletilmiş kodlama (bayt)
– Bayt 12
– Bit 0’ı etkinleştirin (Anti-hırsızlık sistemi kurulu / aktif)
– Uyarlama
– Alt menü – Hırsızlığa karşı koruma
– DWA Alarmverzoegerung (Değeri “kapı” olarak değiştirin Thatcham sürücü “) ile iletişime
etkin “) – DWA Camper Modus (değiştir değeri 8”
– resimde görüldüğü gibidir Innenentriegelungshelbel (değiştir değeri için “”) aktive
– Akustischer Alarm Signalhorn (değiştir değeri için “” etkin)
– Alt menü – Cevap Sinyalleri
– Akustische Rueckmeldung küresel (Değiştir değeri olarak “etkin”)
– Akustische Rueckmeldung Signalhorn (Değiştir değer “aktif” olarak)

Alarm, birkaç saniye sonra devreye girer.

Kontak Açıkken Kapı Açık Uyarı Sesi İptali

– Modül 17 – Kod Kutusu cihazları – (25327)
– Uyarlama
– Seç – Aktif mesajda, uyarı
– Üç seçenekten birini seçin:
– Sürücü kapısı (varsayılan)
– Tüm kapılar
– Gösterge yok

Aracın Kilitlenmesi ve Kilidinin Açılması Uyarı Sesi

– Modül 09 – Elektronik. Kodu (31347)
– Uyarlama
– İşaretler yanıtı
– Alt – Akustische rueckmeldung entriegeln — On
– Alt – Akustische rueckmeldung verriegeln — On
– Alt – Global rueckmeldung — On Akustische
– Sub – Akustische rueckmeldung Signalhorn — On
– Alt – Menuesteuerung Akustische rueckmeldung — On (Ekran Üstü)
– Alt – Dauer der vom akustischen rueckmeldung einfachhorn — Normal (Alarm yok) veya Kurz (alarm ile)

Emniyet Kemeri Uyarı Sesi

– Modül 17 – Kod Kutusu cihazları – (25327)
– Genişletilmiş Kodlama (Metin modu)
– Seç – Şunun için bildirim emniyet kemeri kullanımı
– Seçeneklerden birini seçin:
– Seçenek 1 (varsayılan)
– Varyant 2
– Kapalı

Radyo Anten Kazanç Arttırma

– Modül 5F – Elektronik Bilgi 1. Kod (20103)
– Uyarlama
– Seç
– Varsayılan olarak -128db

 

Mikrofon Hassasiyetinin Arttırılması

– Modül 5F – Elektronik Bilgiler 1. Kod (20103)
– Uyarlama
– Seç – Mikrofon Hassasiyeti
– İstediğiniz değeri değiştirin. Varsayılan 0 db

 

AUX IN (USB + SES MODÜLÜ) Etkinleştirme

– Modül 5F – Elektronik Bilgi 1. Kod (20103)
– Genişletilmiş Kod (Metin modu)
– Bayt 8 AUX-IN
– İki seçenekten birini seçin:
– Açık (varsayılan)
– Kapalı

USB Modu Değiştirme

– Modül 5F – Elektronik Bilgi 1. Kod (20103)
– Genişletilmiş Kod (Metin modu)
– Bayt 19 USB
– Dört seçenekten birini seçin:
– USB-IPOD (varsayılan)
– Kapalı
– Şarj
– Tam

 

Klima Performans Yükseltme

– Modül 08 – Elektronik klima / ısıtma
– Genişletilmiş Kodlama (Metin)
– Sıcaklık Ayarı
– Değeri değiştir: Daha soğuk ayar func.refrig

AUTO Modunda Klima Kontrol Fan Hızı Gösterimi

– Modul 08 – Klima / ısıtma elektroniği
– Genişletilmiş kodlama (bayt)
– Bayt 8
– Bit 0’ı etkinleştirin

Ön Cam Isıtma Süresi

– Modül 09 – Elektronik. Kod (31347)
– Uyarlama
– Seçme – Isıtma kristalleri
– Alt – Isıtmalı ön camın çalışma süresi
– Değeri 240 olarak değiştirin

Arka Cam Isıtma Süresi

– Modül 09 – Elektronik. Kod (31347)
– Uyarlama
– Seçme – Isıtma kristalleri
– Alt – Heckscheibenheizung zeitwert
– Değeri 600 saniyeye değiştirin

Audi A4/S4/A5/S5 B8 Vag Com Kodları

Kodlama işlemleri riskli işlemlerdir. İşlemi yapmadan önce mutlaka kodların yedeğini alınız.

MMI 3G Gizli Menü Aktivasyonu

[5F – Information Electr.]
[Adaptation – 10] -> Channel 6
0 değerini 1 yapın

Menüye erişmek için car ve setup tuşlarına birlikte 5 saniye basılı tutun.

________________________________________
MMI 2G Gizli Menü Aktivasyonu

[07 – Control Head]
[Adaptation – 10] -> Channel 8 -> Change 0 to 1

Menüye erişmek için car ve setup tuşlarına birlikte 5 saniye basılı tutun.
________________________________________

Bluetooth mikrofon hassaslık ayarı

Gizli menü
Diagnose
Settings
Mic sensiblity – choose -6db/0db/+6db

________________________________________

Kamera Resim Ayarı

[6C-Back-up Cam.] [Security Access – 16] (enter security code 22351)

[Adaptation – 10]

Channel 10 (Brightness)

Default: 50 (Set between 1-100)

Channel 11 (Contrast)

Default: 50 (Set between 1-100)

Channel 12 (Saturation)

Default: 50 (Set between 1-100)

Channel 13 (Temperature)

Default: 50 (Set between 1-100)

________________________________________

MMI 3G Başlangıç Ekranı Değiştirme

Enable through the “hidden menu”:
– navigate to ‘car/carcodingvehicle’
– choose the model of choice in ‘configuration line’
– select ‘Update Splashscreen’
– restart MMI

________________________________________

Disable After-wipe of windscreen wipers

[09 – Cent. Elect.] [Coding – 07] -> [Dropdown] -> “x ** 8K1 955 119 ** WWS xxxx” -> Long Coding Helper -> Byte 1
Bit 3 – Remove check mark (1 = active)
________________________________________

Disable amber corner lights 

[09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 10
Submodule 0
Bit 3 – Set to 0 to disable amber side markers (U.S. vehicles)
________________________________________

Disable Key warning (keyless models)

[46 – Central Conv.] [Coding – 07] -> Long Coding Helper -> Byte 9
Bit 7 set to 0 (Uncheck)
________________________________________

Disable LED ‘wink’ on turn signal – pre facelift

[09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 3
Bit 2 – LEDs remain at full brightness with parking lights (1 = active)
Bit 7 – Turn off LED-strip DRLs with indicators (1 = active)

________________________________________

Disable LED ‘wink’ on turn signal – facelift

09 – Cent. Elect.] [Security Access – 16] (enter security code. One of the default codes is- 20113)
[Adaptation – 10] -> Channel 3 (Heading Wink Brightness)
Default Value is 26, Setting value to 88 (Makes it identical to normal brightness)
________________________________________

Dim LED wink on turn signal for US cars

Instead of complete wink off, there is another mod that comes as stock in Europe. There is an LED dim instead of wink.

Starting with factory setting:

Central Electronics 09

Coding 07

Long Code helper

Byte 02 – Check bit 6 (Side Marker as DRL)

If you have already eliminated the winking, the you will need to go to Byte 03 and undo the modification. In other words, the winking DRL options (Bit 7) will need to remain checked/on as it was in the factory setting.

________________________________________

Disable bulb error message with LED reverse lights installed

https://www.a5oc.com/forums/a5-perfor…tml#post296914

________________________________________

Disable “Lights are on” Warning

[09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 5
Bit 3 – Set to 0 to disable “lights are on” warning when you open the door.
________________________________________

Disable NAV & Phone warning messages while entering data at speed

[5F – Information Electr.] -> Adaptation -> Set channel 2 & 3 to 250
________________________________________

Emniyet Kemeri Uyarısı Kaldırma

[17 – Instruments] [Coding – 07] -> Long Coding Helper -> Byte 0
Bit 2-4 – Seat Belt Warning

________________________________________

To mute the Soundaktuator

A9 Structure Borne Sound
Adaptation 10
At Channel drop down choose “Volume of structure borne noise actuator” (only choice)
Enter a value in the proper box (0% = mute )
________________________________________

Enable Adaptive brake lights 

[46 – Comfort System] [Coding – 07] -> Long Coding Helper -> Byte 8
Bit 0 – Emergency Brake Flashing via Turn Lights active (1 = active)
Bit 1 – Emergency Brake Flashing via Brake Lights active (1 = active)

________________________________________

Enable Optical rear parking for cars without front parking sensors

[10 – Park/Steer Assist] [16 – Security Access – 71679] do it [07 – Coding] Byte 0 – Bit 4 change 0 to 1
________________________________________

Enable Automatic Gear selection shown in DIS 

[02 – Auto Trans] [Adaptation – 10]
Select “Single Gear Display” from top channel drop down menu
Select “D on/S on” from New value drop down menu
________________________________________

Enable Automatic Hill Hold Assist ‘lite’*only works on certain abs modules – see below link*

[03 – ABS brakes][Security Access – 16] (Enter code presented by program)
[Coding – 07] -> Long Coding Helper -> Byte 1
Bit 6 set to 1 to enable hill hold assist.

http://www.audienthusiasts.com/VagComABS.html
________________________________________

Enable Auxiliary ventilation

[5F – Information Electr.] [Coding – 07] -> Long Coding Helper -> Byte 6
Bit 1 – Set to 1
[Hidden menu] [car] [cardevicelist] [Auxiliary heating] Enable
[08 – Auto HVAC] [Coding – 07] -> Long Coding Helper -> Byte 1
Bit 3 – Set to 1
Bit 4 – Set to 1
________________________________________

Enable Battery meter *does not appear to work on facelift cars with MMI 3G+ HDD Navigation*

For MMI equipped cars

[Hidden menu] [car] [cardevextdevicelist] [Battery] Enable
[Hidden menu] [car] [carmenuoperation] [Battery] Set to 5
Reset MMI
or
[56 – Radio] -> Adaption -> Channel 39, add 16 to your value

For symphony, Chorus and Concert

Select module 56 – Radio

Select “Adaptation – 10

Select channel 39

Add 16 to the present value
“test”

“save”

“Done, Go Back” and “Close Controller
________________________________________

Enable DIS with Efficiency Program for MY2010+ (Not a complete Program without the Start/Stop System)

[17 – Instruments] [Adaptation – 10] -> Channel 77
change 0 to 255
________________________________________

Enable Double Disarm Beep

[46 – Central Conv.] [Adaptation – 10] -> Channel 63
Add 4
ensure Module 46, Byte 1, Bit 2 is ticked. This activates the alarm audible notification option
________________________________________

Enable Drivers Memory Seat

36: Seat Mem – 07 Coding – Long Coding Helper – change Byte 2, bit 0, to 1

Seat memory will be there however greyed out in MMI

Press and hold down unlock button on key fob for 5 seconds for the windows to come down

Press and hold down lock button on key fob for 5 seconds for the windows to go back up

In MMI, Seat Adjustment you are now able to find Driver’s seat, you can set Key memory on/off. Set it “on” for both keys separately.
________________________________________

Enable DRL Selectable via MMI

[09 – Cent. Elect.] -> [Coding – 07] -> Long Coding Helper -> Byte 3
Bit 5 set to 1
________________________________________

Enable DRL

[09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 2
Bit 1 = DRL via Front Side markers
Bit 2 = DRL via High Beams
Bit 3 = DRL via Fogs
Bit 4 = DRL via LEDs
Bit 5 = DRL via Parking Lights
Bit 6 = DRL via Side markers
Bit 7 = DRL via Tail lights
________________________________________

Enable Audi Drive Select without the buttons

By far the best guide is here – http://www.audienthusiasts.com/Project_ADS.html
________________________________________

Enable Euro parking lights that turn on signal at night

[09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 9
Bit 0 – Set to 1
________________________________________

Enable interior lighting option for pre-facelift

MMI Basic (Symphony/Concert radio) – (NON-MMI – 2G/3G):
Code:
[56 – Radio]
[Coding – 07] -> Long Coding Helper -> Byte 8 Bit 7 – Interior Light Settings active – (1 = active)

MMI high (2G):
Code: Enable the Interior lighting (extended) MMI item:
[07 – Control Head]
[Adaptation – 10] -> Channel 1 add 2 to the existing value

MMI high (2G hidden menu as alternative)
If you choose to use the 2G hidden menu you will find the setting using the following:
DIAG SETTINGS -> APK 0x01, 0x0B, 0x0C -> Interior lighting (extended)

MMI 3G and MMI3G+

This can only be activated through hidden menu

Enter hidden menu – choose car – choose carmenuoperation – select interior light – set to 5 to allow adjustment whist moving – press return – select cardevicelist – choose interior light and press to fill box in – press return

*at this point 3G owners do step below, 3G+ go to (3G+ only) below

(3G only) Reset MMI (press setup, scroll wheel and top right button next to scroll wheel at the same time)

(3G only) Option will show in MMI

(3G only) [09 – Cent. Elect.]

[Coding – 07] – Long Coding Helper -Byte 16 Bit 6 – Set this bit manually to 1

(3G+ only)

Facelift needs an extra setting to activate the option.
Hidden Menu > car > carbusassignment > Interior Light > change from 9 to 1.

Reset MMI

Enable interior lighting for facelift cars

[09 – Cent. Elect.]
[Coding – 07] -> [Long Coding Helper] -> Byte 16
Bit 6 – Interior/Ambience Lighting Adaptation active
Hidden Menu > car > carbusassignment > Interior Light > change from 9 to 1
________________________________________

Enable fog lamp to come on for the same side as that turn signal

[09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 4
Bit 0 – Check the box or change :Bit 0 set to 1
________________________________________

Enable Front Turn Signals as Parking lights

[09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 10
Bit 0- Check the box or change :Bit 0 to 1
Once the change has been made you can enable the front turn signals as DRL’s by making the following change:
[09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 2
Bit 6 – Check the box or change :Bit 0 set to 1
________________________________________

Enable Gauge Test/Needle Sweep 

[17 – Instruments] [Coding – 07] -> Long Coding Helper -> Byte 1
Bit 0 – Check the box for “Gauge Test/Needle Sweep active”
________________________________________

Enable Headlights on all the time

[09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 4
Bit 5 – Check the box or change (Bit 5 Set to 1)
________________________________________

Enable Horn confirmation on locking

[46 – Cent. Convenience.] [Coding – 07] -> Long Coding Helper -> Byte 1
Bit 2 – Check the box or change (Bit 2 Set to 1)

________________________________________

Enable Import CDs to MMI’s HD

[Hidden menu]
Main/Diagnose/Settings
Import Media
Set to 4 of 4 “Copy/Ripping”
________________________________________

Enable Independent Fogs control with high beams

[09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 4
Bit 1 – (Front) Uncheck the box or change :Bit 1 to 0
Bit 2 – (Rear) Uncheck the box or change :Bit 2 to 0
________________________________________

Enable Lap Timer 

[17 – Instruments] [Coding – 07] -> Long Coding Helper -> Byte 1
Bit 3 – Check the box for “Lap Timer active”
______________________________________

Enable Remote Operation Windows and Sunroof 

[46 – Cent. Conv.] [Coding – 07] -> [Long Coding Helper] Byte 2
Bit 2 – Set to 1
______________________________________

Enable Rear Tail Lights on with DRLs

[09 – Cent. Elect.] [Coding – 07] -> Long Coding Helper -> Byte 2
Bit 7 – DRL’s via Tail Lets Active (1 = Active)
________________________________________

Enable Release Parking Brake without putting foot on Brake

[53 – Parking Brake][Security Access – 16] (Enter code presented by program)
[Adaptation – 10] -> Channel 4 Set to 0
________________________________________

Enable Release Parking Brake without putting seatbelt

[53 – Parking Brake][Security Access – 16] (Enter code presented by program)
[Adaptation – 10] -> Channel 7 Set to 0
________________________________________

Enable Reverse mirror tilt

[52 Door Elect, Pass.] -> [Coding – 07] -> [Long Coding Helper] -> Byte 4
Bit 3 and Bit 2 set to 1
________________________________________

Enable Speed on chorus, concert or symphony display

Module 56 – Radio
Adaptation – 10
Channel 2 –> change 0 into 1 (driving school mode active).
New menu item: Under Radio Setup “ON/OFF” driving school mode.
________________________________________

Enable ‘Tourist’ Mode – Headlight Convertor (MMI 2G)

[09-Central Elect]
[Coding – 07]
[Long Coding Helper] – Byte 4, Bit 6 = 1
Enables the ‘connection’ between Cent. Elect and the Headlight Convertor MMI menu item
[55-Xenon Range]
[Adaptation – 10]
[Channel 10] – 0 = Disable 1 = Enable
Press ‘Test’ and then ‘Save’
Enables the Headlight Convertor MMI item under the CAR button.
Restart MMI to see changes.

________________________________________

Enable TPMS
* only works with certain ABS modules – see below link *

http://www.audienthusiasts.com/VagComABS.html
________________________________________

Enable Video in motion on MMI

[5F – Information Electr.] [Advanced ID – 1A] Note 1st Serial number
[Security Access] Enter Digits 6, 13, 10, 14, 11 of the 1st Serial number
[Adaptation – 10] -> Channel 48
Set to 255
Reset MMI
________________________________________

Set Audi parking system – Switch OFF Speed

[10 – Park/Steer Assist] [Adaptation – 10] -> Channel 23
Set to 20 (max value in km/h)
________________________________________

Set ADS to specific preset Comfort, Auto, Dynamic or Individual

[09 – Cent. Elect.][Security Access – 16]
[Adaptation – 10] -> Channel 63
Set to 01 – Comfort, 02 – Auto, 03 – Dynamic or 04 – Individual
[Adaptation – 10] -> Channel 64
Set to 01 – Comfort, 02 – Auto, 03 – Dynamic or 04 – Individual
[Adaptation – 10] -> Channel 65
Set to 01 – Comfort, 02 – Auto, 03 – Dynamic or 04 – Individual
[Adaptation – 10] -> Channel 66
Set to 01 – Comfort, 02 – Auto, 03 – Dynamic or 04 – Individual
*Note all four channels needs to be set to the same value.

________________________________________

Set Headlight washer – Duration

[09 – Cent. Elect.]
[Security Access – 16] [Adaptation – 10] -> Channel 6
change to e.g. 500
________________________________________

Set Headlight washer – Cycles

[09 – Cent. Elect.]
[Security Access – 16] [Adaptation – 10] -> Channel 26
change to e.g. 10
________________________________________

Adjust Consumption in DIS 

[17 – Instruments]
[Adaptation – 10] -> Channel 3
change 100 to xxx (see samples below)

Sample 1 – Calculation based on volume per distance (e.g. l/100km):
DIS: 9,3 l/100 km.
Real: 9,8 l/100 km. (100 * 9,8 / 9,3 = 105,38)
Channel 3 will be changed from 100 to 105

Sample 2 – Calculation based on distance per volume (e.g. MPG):
DIS: 23 MPG.
Real: 24 MPG. (100 * 23 / 24 = 95,83)
Channel 3 will be changed from 100 to 96
________________________________________

Adjust LED brightness

[09 – Cent. Elect.] [Security Access – 16] (enter security code. One of the default codes is- 20113)
[Adaptation – 10] -> Channel 03
Set between 5 and 100 (5 being lowest and 100 brightest)
________________________________________

Select language in DIS:

17 – Instruments
Byte 8 -> Bit 0-4 – ->
Select the language.
________________________________________

Activate SDS for cabriolet:

5F–Information Electr.
Change Byte 15 – Bit 0 to 1
Change Byte 16 – Bit 0 to 0
________________________________________

Change fuel-tank charisterics:

17 – Instruments
Adaption – change channels 30 and 33
________________________________________

To increase radio play time after car is turned off:

In the Hidden Menu:

MMI 2G:
“MMI->SETTINGS->Standby Timer” – will allow you to hear e.g. Radio or CD longer before MMI shutdown (if ignition is OFF) – default 10 min. and the max. is 60 min.

MMI 3G:
From the main screen select ‘onofftimer’, set ‘Standby delay’. The maximum value is 30 minutes

________________________________________

Select language in DIS

17 – Instruments
Byte 8 -> Bit 0-4 – ->
Select the language.

________________________________________

Activate SDS for cabriolet

5F–Information Electr.
Change Byte 15 – Bit 0 to 1
Change Byte 16 – Bit 0 to 0

________________________________________

Change fuel-tank charisterics

17 – Instruments
Adaption – change channels 30 and 33

________________________________________

Audi Drive Select – MMI 2G

09 Central Elec – Long Coding Helper

Byte 7, Bit 5 Change 0 to 1 (tells car ADS is installed, Charisma fault generated)

Byte 8, Bit 2 Change 0 to 1 (Enables engine setting in MMI)

Byte 8, Bit 3 Change 0 to 1 (Enables suspension setting in MMI [I didn’t do this as my suspension isn’t adjustable])

Byte 8, Bit 4 Change 0 to 1 (Enables steering [servotronic] setting in MMI)

Byte 8, Bit 5 Change 0 to 1 (Enables sports diff setting in MMI [I didn’t do this as I don’t have the sport diff])

Byte 17, Bit 7 Change 0 to 1 (Enables MMI display)

—————————————————————-

09 Central Electronic

16 Security Access

Type in code in pop up (for me it was 20113)

Click “Do It!”

—————————————————————-

09 Central Electronic

10 Adaptation

Channels 63, 64, 65, 66

Change Value to 4 for each channel (1 = Comfort, 2 = Auto (default), 3 = Dynamic, 4 = Individual)

Click Test and then Save for each channel

Ensure setting of 4 for all channels again

—————————————————————-

In MMI hidden menu go to Diag settings, Car menus maske, check ‘Charisma’ box and go down to Accept changes (this was already ticked on mine and my mates car). Whilst still in the hidden menu go to Diag settings, APK 0x01, 0x0B, 0x0C, check ‘Charisma’ box and go down to Accept changes.

________________________________________